home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19941221-19950208
/
000034_news@columbia.edu_Wed Dec 28 05:58:13 1994.msg
< prev
next >
Wrap
Internet Message Format
|
1995-07-31
|
2KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA22134
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Wed, 28 Dec 1994 01:12:53 -0500
Received: by apakabar.cc.columbia.edu id AA09087
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Wed, 28 Dec 1994 01:12:52 -0500
Newsgroups: comp.protocols.kermit.misc
Path: news.columbia.edu!sol.ctr.columbia.edu!howland.reston.ans.net!ix.netcom.com!netcom.com!lachman
From: lachman@netcom.com (Hans Lachman)
Subject: Kermit on WindowsNT (using TCP)?
Message-Id: <lachmanD1IB92.A9F@netcom.com>
Organization: Netcom, Silicon Valley
Distribution: na
Date: Wed, 28 Dec 1994 05:58:13 GMT
Lines: 19
Apparently-To: kermit.misc@watsun.cc.columbia.edu
I'm trying to use Kermit in TCP/IP mode on a PC running WindowsNT.
I got MSVIBM.ZIP (MS-Kermit 3.13) and unpacked it, and it runs.
I did "set tcp host" (followed by remote host address), "set
port tcp", then "connect", and I got:
Cannot attach to an Ethernet Packet Driver or a Novell ODI driver.
Unable to initialize TCP/IP system, quitting.
?Cannot start the connection.
Just to eliminate obvious problems, I then tried setting appropriate
values for "address", "domain", "gateway", and "primary-nameserver".
"Packet-driver-interrupt" is set to 0 (meaning "search for it")
by default. Anyway, I get the same error message no matter what.
I was hoping this would work, since NT comes with TCP/IP built in.
Anyone know of a tweak that can make Kermit run using TCP on NT?
Hans Lachman <lachman@netcom.com>
"You are lost in a maze of twisty little passages, all alike."